產品詳情
簡單介紹：
PROCON 111B100F11AA250系列PROCON低溫冷卻液循環水泵，流量100加侖/小時（300升/小時），壓力250PSI（約17公斤），揚程140-170米，產品經過食品認證，有NSF證書，可用于咖啡機、小家電、自動售賣機、啤酒輸送系統等，具有耐磨、不阻塞、衛生、低噪音、使用壽命長等優點。
詳情介紹：
PROCON低溫冷卻液循環水泵[運行條件]
Make sure that the pumped fluid is compatible with the materials of the pump. For particular applications, please contact the nearest
authorized Fluid-o-Tech distributor.
? Avoid as well to use liquids with higher temperature than 70 °C (158 °F).
? The maximum differential pressure must not exceed 16 bar (230 psi).
? The maximum system pressure must not exceed 20 bar (290 psi).
? A circuit lay out with elbows and sudden changes in the diameter of the pipes, causes turbulence in the water and resonance in the
machine.This is also worsened when the pump is not fed by the main water line.
? Although Fluid-o-Tech may give technical support for pump’s use, the final approval of the pumps is responsibility of the Customer, in
fact the performances and reliability may be affected by particular operating conditions and/or hydraulic circuit lay out.
PROCON低溫冷卻液循環水泵確保介質與泵頭接觸介質的材料相適合。如果有特殊應用，請就近聯系 Fluid-o-Tech 授權經
銷商。
9
避免泵機內液體溫度超過 70°C（158°F）
9 差壓不允許超過 16bar (巴)（230psi 磅/平方英寸）。
9 系統壓力不允許超過 20bar(巴)（290psi 磅/平方英寸）。
9
如果在管路內有彎頭與突變，會導致紊流和機器共振。當泵頭進水不足時，情況更為惡
劣。
9
雖然 Fluid-o-Tech 公司在泵的選型和應用方面提供技術支持，但確認由客戶負責，
事實上，泵的性能與可靠性可能會受到各自運行條件或流體系統狀態的影響。
